Fediversity/infra/vm02186/procolix-configuration.nix
Nicolas Jeannerod 18b03924ad Format and clean dead code in infra/ (#12)
Reviewed-on: Fediversity/Fediversity#12
Co-authored-by: Nicolas “Niols” Jeannerod <nicolas.jeannerod@moduscreate.com>
Co-committed-by: Nicolas “Niols” Jeannerod <nicolas.jeannerod@moduscreate.com>
2024-11-18 12:09:30 +01:00

198 lines
6.9 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{ pkgs, ... }:
{
# Use the systemd-boot EFI boot loader.
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
networking = {
hostName = "vm02186";
domain = "procolix.com";
interfaces = {
eth0 = {
ipv4 = {
addresses = [
{
address = "185.206.232.186";
prefixLength = 24;
}
];
};
ipv6 = {
addresses = [
{
address = "2a00:51c0:12:1201::186";
prefixLength = 64;
}
];
};
};
};
defaultGateway = {
address = "185.206.232.1";
interface = "eth0";
};
defaultGateway6 = {
address = "2a00:51c0:12:1201::1";
interface = "eth0";
};
nameservers = [
"95.215.185.6"
"95.215.185.7"
];
firewall.enable = false;
nftables = {
enable = true;
ruleset = ''
#!/usr/sbin/nft -f
flush ruleset
########### define usefull variables here #####################
define wan = eth0
define ssh_allow = {
83.161.147.127/32, # host801 ipv4
95.215.185.92/32, # host088 ipv4
95.215.185.211/32, # host089 ipv4
95.215.185.34/32, # nagios2 ipv4
95.215.185.181/32, # ansible.procolix.com
95.215.185.235/32, # ansible-hq
}
define snmp_allow = {
95.215.185.31/32, # cacti ipv4
}
define nrpe_allow = {
95.215.185.34/32, # nagios2 ipv4
}
########### here starts the automated bit #####################
table inet filter {
chain input {
type filter hook input priority 0;
policy drop;
# established/related connections
ct state established,related accept
ct state invalid drop
# Limit ping requests.
ip protocol icmp icmp type echo-request limit rate over 10/second burst 50 packets drop
ip6 nexthdr icmpv6 icmpv6 type echo-request limit rate over 10/second burst 50 packets drop
# loopback interface
iifname lo accept
# icmp
ip protocol icmp icmp type { destination-unreachable, echo-reply, echo-request, source-quench, time-exceeded } accept
# Without the nd-* ones ipv6 will not work.
ip6 nexthdr icmpv6 icmpv6 type { destination-unreachable, echo-reply, echo-request, nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert, packet-too-big, parameter-problem, time-exceeded } accept
# open tcp ports: sshd (22)
tcp dport {ssh} accept
# open tcp ports: snmp (161)
ip saddr $snmp_allow udp dport {snmp} accept
# open tcp ports: nrpe (5666)
ip saddr $nrpe_allow tcp dport {nrpe} accept
# open tcp ports: http (80,443)
tcp dport {http,https} accept
}
chain forward {
type filter hook forward priority 0;
}
chain output {
type filter hook output priority 0;
}
}
table ip nat {
chain postrouting {
}
chain prerouting {
}
}
'';
};
};
# Set your time zone.
time.timeZone = "Europe/Amsterdam";
# Select internationalisation properties.
i18n.defaultLocale = "en_US.UTF-8";
# Define a user account. Don't forget to set a password with passwd.
users.users.root = {
hashedPassword = "$y$j9T$WXvLAUqArJJusuC017FCW0$.rfMOeyx/BsClkJFi5hLcynrSk.njWmfiB6Uy.9th3A";
openssh.authorizedKeys.keys = [
"ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEElREJN0AC7lbp+5X204pQ5r030IbgCllsIxyU3iiKY"
"ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJg5TlS1NGCRZwMjDgBkXeFUXqooqRlM8fJdBAQ4buPg"
];
};
users.users.procolix = {
isNormalUser = true;
extraGroups = [ "wheel" ]; # Enable sudo for the user.
hashedPassword = "$y$j9T$UH8Dh/poTCCZ3PXk43au6/$iYen8VUEVvv7SIPqteNtTPKktLxny3TbqvjUwhvi.6B";
openssh.authorizedKeys.keys = [
"ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAotfCIjLoDlHOe+++kVS1xiBPaS8mC5FypgrxDrDVst6SHxMTca2+IScMajzUZajenvNAoZOwIsyAPacT8OHeyFvV5Y7G874Qa+cZVqJxLht9gdXxr1GNabU3RfhhCh272dUeIKIqfgsRsM2HzdnZCMDavS1Yo+f+RhhHhnJIua+NdVFo21vPrpsz+Cd0M1NhojARLajrTHvEXW0KskUnkbfgxT0vL9jeRZxdgMS+a9ZoR5dbzOxQHWfbP8N04Xc+7CweMlvKwlWuAE/xDb5XLNHorfGWFvZuVhptJN8jPaaVS25wsmsF5IbaAuSZfzCtBdFQhIloUhy0L6ZisubHjQ== procolix@sshnode1"
"ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAuT3C0f3nyQ7SwUvXcFmEYEgwL+crY6iK0Bhoi9yfn4soz3fhfMKyKSwc/0RIlRnrz3xnkyJiV0vFeU7AC1ixbGCS3T9uc0G1x0Yedd9n2yR8ZJmkdyfjZ5KE4YvqZ3f6UZn5Mtj+7tGmyp+ee+clLSHzsqeyDiX0FIgFmqiiAVJD6qeKPFAHeWz9b2MOXIBIw+fSLOpx0rosCgesOmPc8lgFvo+dMKpSlPkCuGLBPj2ObT4sLjc98NC5z8sNJMu3o5bMbiCDR9JWgx9nKj+NlALwk3Y/nzHSL/DNcnP5vz2zbX2CBKjx6ju0IXh6YKlJJVyMsH9QjwYkgDQVmy8amQ== procolix@sshnode2"
];
packages = with pkgs; [ ];
};
users.users.niols = {
isNormalUser = true;
extraGroups = [ "wheel" ]; # Enable sudo for the user.
openssh.authorizedKeys.keys = [
"ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEElREJN0AC7lbp+5X204pQ5r030IbgCllsIxyU3iiKY niols@wallace"
"ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIBkQXv/VRZLfV0wNN9PHedmKWyAIfpPUCdaznHZNIDkS niols@orianne/fediversity"
];
packages = with pkgs; [ ];
};
users.users.valentin = {
isNormalUser = true;
extraGroups = [ "wheel" ]; # Enable sudo for the user.
openssh.authorizedKeys.keys = [
"ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIOJzgwAYAoMexc1fBJxU08YmsiU9T4Ua8QFeE4/kZNZ5"
];
packages = with pkgs; [ ];
};
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
(pkgs.vim_configurable.customize {
name = "vim";
vimrcConfig.packages.myplugins = with pkgs.vimPlugins; {
start = [ vim-nix ]; # load plugin on startup
};
vimrcConfig.customRC = ''
" your custom vimrc
set nocompatible
set backspace=indent,eol,start
" Turn on syntax highlighting by default
syntax on
" ...
'';
})
wget
];
# List services that you want to enable:
# Enable the OpenSSH daemon.
services.openssh.enable = true;
# This value determines the NixOS release from which the default
# settings for stateful data, like file locations and database versions
# on your system were taken. Its perfectly fine and recommended to leave
# this value at the release version of the first install of this system.
# Before changing this value read the documentation for this option
# (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
system.stateVersion = "24.05"; # Did you read the comment?
}