Fediversity/infra/common/nftables-ruleset.nft

72 lines
2 KiB
Plaintext

#!/usr/sbin/nft -f
flush ruleset
########### define usefull variables here #####################
define wan = eth0
define ssh_allow = {
83.161.147.127/32, # host801 ipv4
95.215.185.92/32, # host088 ipv4
95.215.185.211/32, # host089 ipv4
95.215.185.34/32, # nagios2 ipv4
95.215.185.181/32, # ansible.procolix.com
95.215.185.235/32, # ansible-hq
}
define snmp_allow = {
95.215.185.31/32, # cacti ipv4
}
define nrpe_allow = {
95.215.185.34/32, # nagios2 ipv4
}
########### here starts the automated bit #####################
table inet filter {
chain input {
type filter hook input priority 0;
policy drop;
# established/related connections
ct state established,related accept
ct state invalid drop
# Limit ping requests.
ip protocol icmp icmp type echo-request limit rate over 10/second burst 50 packets drop
ip6 nexthdr icmpv6 icmpv6 type echo-request limit rate over 10/second burst 50 packets drop
# loopback interface
iifname lo accept
# icmp
ip protocol icmp icmp type { destination-unreachable, echo-reply, echo-request, source-quench, time-exceeded } accept
# Without the nd-* ones ipv6 will not work.
ip6 nexthdr icmpv6 icmpv6 type { destination-unreachable, echo-reply, echo-request, nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert, packet-too-big, parameter-problem, time-exceeded } accept
# open tcp ports: sshd (22)
tcp dport {ssh} accept
# open tcp ports: snmp (161)
ip saddr $snmp_allow udp dport {snmp} accept
# open tcp ports: nrpe (5666)
ip saddr $nrpe_allow tcp dport {nrpe} accept
# open tcp ports: http (80,443)
tcp dport {http,https} accept
}
chain forward {
type filter hook forward priority 0;
}
chain output {
type filter hook output priority 0;
}
}
table ip nat {
chain postrouting {
}
chain prerouting {
}
}